© Mitsubishi Electric Australia 2023
- ARCTick # AU00245
- Privacy
- Website terms
- Legal statements
- Website by G Squared
- ARCTick # AU00245
- Privacy
- Website terms
- Legal statements
- Website by G Squared
Jet Towel Commercial Hand Dryer
JT-SB216JSH2
The Jet Towel is the World’s first high speed Jet/Vertical type Hand dryer released in 1993. The latest Jet Towel Slim 9th series has been enhanced with vandal-resistant features designed to improve the overall durability of the hand dryer. Hidden switches and buttons have been moved to the inside of the panel to prevent unauthorised operation, whilst the front and back panels have been strengthened to increase body durability.
The space to insert hands is a wide 7.7 cm at the narrowest point and 20.8 cm deep. The large drying area makes it easier to dry hands, limiting the risk to touch the unit.
Alternate child sensors are placed inside of the drying area to detect the presence of small hands entering from the sides.
Large 6.8 L drying area.
The patented wave nozzle that delivers the high-velocity airflow has been further improved. The sound produced from turbulence has been further decreased through the development of fluid control technology, achieving a significant 2 dB reduction in noise compared to the previous model.
This high-precision Brushless DC motor is entirely developed and manufactured by Mitsubishi Electric. In-house testing results show a motor life of over seven years of use (400 uses per day).
Reinforced protective panels designed for the front and back make the new Jet Towel Slim more robust and impact resistant.
The air intake is located separately from the output nozzles to reduce the risk of water intake.
High-voltage circuit boards are completely covered by a protective metal enclosure. In the highly unlikely event of a fire occurring, flames are sealed in and cannot spread outside of the barrier.
The Jet Towel does not create any paper waste, eliminating the trouble of waste disposal.
The cost of constantly replacing paper towels each day can be staggering.
Paper Towels need to be constantly refilled and paper garbage removed throughout the day.
NSF International, an independent third-party public safety health and standards organisation, has certified Jet Towels to be compliant in its rigorous requirements (NSF/ANSi 169).
The Plastics used in Jet Towels kerb the growth of bacteria on the surface. The secret is the metal ions added into the resin, which work to inhibit the functions of bacteria and reproductive growth.
0.8 L drain tank keeping floors dry by catching the water blown from the hands. The easily removable drain tank stores up to approximately 800 uses.
Maintenance is a breeze with the easy access of the washable air filters and drain duct.
| Colour | Power Supply | Mode | Heater | Drying Time*1 (sec) | Power Consumption (W) | Noise*2 (dB) | Motor Type | Hygienic Features | External Dimensions (mm) | Weight (kg) | Drain Tank (L) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Jet Towel Slim JT-SB216JSH2 | White | 220-240V 50-60Hz |
High | ON | 9-11 | 1240 | 59 | Brushless DC | – Antibacterial surfaces – NSF certification – Alcohol-cleanable |
Width: 300 Depth: 219 Height: 670 |
11 | 0.8 |
| Dark-Grey | OFF | 11-13 | 720 | |||||||||
| Standard | ON | 11-13 | 1070 | 56 | ||||||||
| Silver Dark-Grey | OFF | 13-15 | 550 |
*1 Time needed to reduce remaining water to 50mg or less per hand (in-house study).
*2 Measurements made in anechoic chamber at a distance of 2m.
Optional covers are available to prevent the collection of dust and grime on the main body and hanging fixture sections. (Part No. PAC-SF81KC-E)
The unit’s rear panel has a knock-out opening where two 200 mm diameter spigots (optional duct flange Part no. PAC-SF28OF-E) can be installed to bring fresh air into the unit. This helps improve ventilation and make the kitchen comfortable.
When used in kitchens, the oil mist filter should be replaced once every two months. The system comes with 12 filter elements. After these have been used, optional elements (PAC-SG38KF-E) can be purchased.
The filter cleaning notification icon (which looks like a grid pattern), will appear on the main display when it is time to clean the filters. Wash, clean, or replace the filters when this sign appears. Refer to the indoor unit Instructions Manual for details.
If two or more indoor units are connected, filter cleaning timing for each unit may be different, depending on the filter type. The notification icon will appear when the filter on the main unit is due for cleaning.
When the filter sign is reset, the cumulative operation time of all units will be reset.
The notification icon is scheduled to appear after a certain duration of operation, based on the premise that the indoor units are installed in a space with ordinary air quality. Depending on the air quality, the filter may require more frequent cleaning.
The cumulative time at which the filter needs cleaning depends on the model.
© Mitsubishi Electric Australia 2023