VS-50XL50U

Mitsubishi Expertise Sets the New Global Standard in Display Walls.

Features

  • 1024 x 768 Native XGA Resolution
  • DLP™ (0.7" 12-degree DMD™ 1 Chip)
  • Super-High Brightness of 1000 cd/m2 (Bright mode)
  • 1600:1 Contrast ratio
  • Space-saving, lightweight design - only 53.5 cm deep
  • Typical Screen-to-Screen Gap – 1mm
  • Option Board for Video, Scaling and UXGA

The 50" VS-50XL50U sets the new global standard in Display Wall solutions. Its outstanding brightness of 1000 cd/m² and super-high contrast ratio of 1600:1, combined with superior image processing, vivid colour rendition and a host of performance-enhancing features produces an exceptionally sharp, perfectly balanced image across the entire display wall areas.

Where space is limited, a fully front maintenance version is also available (Model VS-50XLF50U) which allows the system to be installed directly against a wall eliminating the need for servicing space at the rear.

To further minimize the potential for downtime exposure, an automatic "speed-swap" lamp changer version is available (Model VS-50XLW50U) which can replace a failed lamp and get an image back up on-screen in about 10 seconds.

 

Dynamic Brightness Balancing

Each Mitsubishi display wall cube is equipped with a built-in brightness sensor (brightness is measured every 2 seconds). The Dynamic Brightness Balancing circuit then communicates the measured brightness data between all cubes and automatically performs the necessary adjustments to maintain optimum brightness uniformity across the entire display wall.

Colour Space Control

Mitsubishi's original industry proven Digital Colour Space Control (digital colour balancing and blending circuit) compensates for colour and brightness differences among multi-screen configurations. This system adjusts the Gain, and the Red, Green and Blue (RGB) primary colours, plus other mixed colours to provide consistent colour blending and brilliance uniformity across the entire display wall.

Smart Lamp

The lamp module of each Mitsubishi display wall cube stores its own colour characteristics. This data is then utilized when replacing the lamp in one or more cubes within the display wall. Upon replacement, the cube with the new lamp automatically communicates that lamp’s data with all other cubes and performs the Colour Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs.

Smart Colourwheel


The colour wheel module of each Mitsubishi display wall cube stores its own colour characteristics. This data is then utilized when replacing the colour wheel in one or more cubes within the display wall. Upon replacement, the cube with the new colour wheel automatically communicates that colour wheel’s data with all other cubes and performs the Colour Space Control adjustment to rebalance the entire display wall, saving time and reducing maintenance costs.

12 Bit Dither & Gamma Circuit

Mitsubishi's original 12-Bit Dither & Gamma Circuit enables the display of truly natural gradation (gray-scale) by accurately rendering both bright and dark areas for precise half-tone images. This circuit also processes frame (time axis) direction to ensure smoother gradation and optimum colour fidelity for all images.

Digital Gradation Circuit


Mitsubishi's original 12-Bit Digital Gradation Circuit can elevate the brightness level at the edges of the screen - where brightness usually fades, in order to ensure the optimum brightness distribution and uniformity over multi-screen tiled configurations.

High Contrast Ratio


The combination of Mitsubishi's original high quality new optical system, super high-contrast screen and 12-degree DMD™ DDR chip (with black metal coating), allow the VS-50XL50U Display Wall Cube to deliver an outstanding contrast ratio of 1600:1 and reproduce sharp, brilliant images with rich, vibrant colours.

   

And More...
  • Option Board allows for daisy-chain of up to 16 cubes without an external processor.

  • Accepts a wide range of input signals from VGA — SXGA as standard.

  • Front viewable LED status indicator can be viewed even when lamp is off.

  • Brightness optimization mechanism for maximum light output.

  • Dual Brightness modes – select between high brightness or longer lamp life.

  • Space-saving, light-weight design with easy-access rear service panel doors.

  • Sealed engine room keeps dust out of the cube enclosure to further reduce maintenance costs.

  • Front maintenance model (VS-50XLF50U) and automatic lamp changer model (VS-50XLW50U) also available.

   

Specification Overview

Model VS-50XL50U
Technology DLP (0.7", 12° DMD single chip)
Screen size 50" diagonal viewable (1270 mm)
Native Resolution 1024 x 768 pixels (XGA)
Brightness Bright – 1000 cd/m² (typical); 292 ft-L (typical)
Normal – 800 cd/m² (typical); 234 ft-L (typical)
Contrast Ratio 1600:1 (typical)
Lamp System Lamp Ultra-high pressure mercury lamp 100/120 W
Input Scanning Frequency 31.5 – 64.0 kHz (horizontal)
49 - 61 Hz (vertical)
Signal Input Terminals Analog 5 BNC (RGBHV) x 1
Video: 0.7VP-P positive / 75 ohm
Synchronous: TTL level (positive/negative)
High Level: 2.5-5.0 V / Low Level: 0-0.5 V
Sync On Green: Video: 0.7 Vp-p positive
Synchronous: 0.3 Vp-p negative
Digital TMDS (DVI-D x 1)
Current Consumption 195/195 W
Power Supply AC100-240 V, 50/60 Hz
Temperature and Humidity Condition at Operation: 10-35°C 20-80% non-condensing
Condition at Storage: -20-50°C 20-80% non-ondensing
Dimension 1016 x 982 x 535 mm
Weight 59 kg
Regulatory Safety UL60950, CSA22.2 No.60950, EN60950, Approved by UL
EMC FCC part 15 Class A, Industry Canada Class A, EN55022 Class A, EN55024, EN61000-3-2, EN61000-3-3

Back to Top

Features

  • 1024 x 768 Native XGA Resolution
  • DLP™ (0.7" 12-degree DMD™ 1 Chip)
  • Super-High Brightness of 1000 cd/m2 (Bright mode)
  • 1600:1 Contrast ratio
  • Space-saving, lightweight design - only 53.5 cm deep
  • Typical Screen-to-Screen Gap – 1mm
  • Option Board for Video, Scaling and UXGA