PURY-P-YHM-A - 22.4 kW - 45 kW

The City Multi R2 Heat Recovery Series makes use of a two pipe refrigerant circuit throughout, with the choice of either Branch Pipe or Header Pipe feeds to indoor units, with manual changeover from cooling to heating to ensure that a constant indoor climate is maintained.

Features

  • World's first and only "2-Pipe" heat recovery system
  • Simultaneous heating and cooling
  • High  COPs / EERs due to new higher efficiency inverter technology
  • Choice of Branch Pipe or Header Pipe feeds to indoor units
  • Energy-saving inverter driven outdoor compressor units with very low start currents
  • No requirement for plant rooms or bulky service shafts
  • Improved pipe run of 150m, with a total system pipe lenght of 300m
  • High Sensible Cooling Function - By raising off coil temperature, a 10% increase in sensible cooling capacity over standard operation is achievable, the result being greater comfort for occupants

The City Multi range is Mitsubishi Electric's answer to large-scale VRF (Variable Refrigerant Flow) applications.  The efficiency of City Multi is second to none and offers a substantial increase in energy efficiency and corresponding EER/COP ratings.

Unique technology

Unique to Mitsubishi Electric, our heat recovery technology uses just two pipes, as opposed to the market conventional three. Designed for simultaneous heating and cooling our R2 and WR2 systems offer substantial savings on installation and annual running costs. 

The heart of City Multi heat recovery is the BC Controller, which houses a liquid/gas separator, allowing the outdoor unit to deliver a mixture of hot gas for heating and liquid for cooling, all through the same pipe.

High energy efficiency

  • A highly efficient R410A scroll compressor design results in less friction losses at the motor.
  • A simplified refrigerant circuit (low-pressure loss) including new accumulator design adds a few more points to the efficiency scale.
  • Enhancements to the heat interchange circuit, an inverter driven fan motor and a heat exchanger design using a new N Groove System improves the overall system efficiency and COPs.

Reduced noise levels

  • Developments in fan blade shape and weight have managed to achieve and even higher performance and lower noise levels

Flexible

The City Multi system provides a modular approach to air conditioning requirements – providing an ideal solution for new build, refurbishment projects and phased installations.

The wide range of indoor units include ducted, ceiling cassettes, wall mounted, ceiling suspended and floor mounted.

Highly intelligent

The City Multi series can be remotely controlled and monitored through MELANS, Mitsubishi Electric Air Conditioning Network Solution. This system allows access via a LAN connection and alterations to operation times and temperatures can be made.

 

PURY-P200-300YHM-A PURY-P350-400YHM-A 
PURY-P200-300YHM-A  PURY-P350-400YHM-A

Specification Overview

Model Name
HP
kW
Indoor Units
PURY-P200YHM-A 8 22.4 1 to 20
PURY-P250YHM-A 10 28.0 1 to 25
PURY-P300YHM-A 12 33.5 1 to 30
PURY-P350YHM-A 14 40.0 1 to 20
PURY-P400YHM-A 16 45.0 1 to 24

Indoor Capacity: 50 - 130%

Indoor Models: P15 to P250 / 1.7 kW to 28 kW

Back to Top

Features

  • World's first and only "2-Pipe" heat recovery system
  • Simultaneous heating and cooling
  • High  COPs / EERs due to new higher efficiency inverter technology
  • Choice of Branch Pipe or Header Pipe feeds to indoor units
  • Energy-saving inverter driven outdoor compressor units with very low start currents
  • No requirement for plant rooms or bulky service shafts
  • Improved pipe run of 150m, with a total system pipe lenght of 300m
  • High Sensible Cooling Function - By raising off coil temperature, a 10% increase in sensible cooling capacity over standard operation is achievable, the result being greater comfort for occupants

Downloads

CITY MULTI Brochure Brochure - (10.57 MB)
CITY MULTI Case Study Brochure - (3.12 MB)